org.opengis.parameter

Interface ParameterValue

All Superinterfaces:

java.lang.Cloneable, GeneralParameterValue

@UML(identifier="CC_ParameterValue",
     specification=ISO_19111)
public interface ParameterValue
extends GeneralParameterValue

A parameter value used by an operation method. Most parameter values are numeric, but other types of parameter values are possible. The parameter type can be fetch with the getValue().getClass() idiom. The getValue() and setValue(Object) methods can be invoked at any time. Others getters and setters are parameter-type dependents.

Since:

GeoAPI 1.0

See Also:

ParameterDescriptor, ParameterValueGroup

Method Summary

Modifier and Type	Method and Description
boolean	booleanValue() Returns the boolean value of an operation parameter A boolean value does not have an associated unit of measure.
java.lang.Object	clone() Returns a copy of this parameter value.
double	doubleValue() Returns the numeric value of the coordinate operation parameter with its associated unit of measure.
double	doubleValue(Unit unit) Returns the numeric value of the coordinate operation parameter in the specified unit of measure.
double[]	doubleValueList() Returns an ordered sequence of two or more numeric values of an operation parameter list, where each value has the same associated unit of measure.
double[]	doubleValueList(Unit unit) Returns an ordered sequence of numeric values in the specified unit of measure.
Unit	getUnit() Returns the unit of measure of the parameter value.
java.lang.Object	getValue() Returns the parameter value as an object.
int	intValue() Returns the positive integer value of an operation parameter, usually used for a count.
int[]	intValueList() Returns an ordered sequence of two or more integer values of an operation parameter list, usually used for counts.
void	setValue(boolean value) Set the parameter value as a boolean.
void	setValue(double value) Set the parameter value as a floating point.
void	setValue(double[] values, Unit unit) Set the parameter value as an array of floating point and their associated unit.
void	setValue(double value, Unit unit) Set the parameter value as a floating point and its associated unit.
void	setValue(int value) Set the parameter value as an integer.
void	setValue(java.lang.Object value) Set the parameter value as an object.
java.lang.String	stringValue() Returns the string value of an operation parameter.
java.net.URI	valueFile() Returns a reference to a file or a part of a file containing one or more parameter values.

Methods inherited from interface org.opengis.parameter.GeneralParameterValue

getDescriptor

Method Detail

getUnit

Unit getUnit()

Returns the unit of measure of the parameter value. If the parameter value has no unit (for example because it is a String type), then this method returns null. Note that "no unit" doesn't means "dimensionless".

See Also:

doubleValue(), doubleValueList(Unit), getValue()

doubleValue

double doubleValue(Unit unit)
            throws InvalidParameterTypeException

Returns the numeric value of the coordinate operation parameter in the specified unit of measure. This convenience method apply unit conversion on the fly as needed.

Parameters:

unit - The unit of measure for the value to be returned.

Returns:

The numeric value represented by this parameter after conversion to type double and conversion to unit.

Throws:

InvalidParameterTypeException - if the value is not a numeric type.

java.lang.IllegalArgumentException - if the specified unit is invalid for this parameter.

See Also:

getUnit(), setValue(double,Unit), doubleValueList(Unit)

doubleValue

@UML(identifier="value",
     obligation=CONDITIONAL,
     specification=ISO_19111)
double doubleValue()
                                                                                                throws InvalidParameterTypeException

Returns the numeric value of the coordinate operation parameter with its associated unit of measure.

Returns:

The numeric value represented by this parameter after conversion to type double.

Throws:

InvalidParameterTypeException - if the value is not a numeric type.

See Also:

getUnit(), setValue(double), doubleValueList(Unit)

intValue

@UML(identifier="integerValue",
     obligation=CONDITIONAL,
     specification=ISO_19111)
int intValue()
                                                                                                 throws InvalidParameterTypeException

Returns the positive integer value of an operation parameter, usually used for a count. An integer value does not have an associated unit of measure.

Returns:

The numeric value represented by this parameter after conversion to type int.

Throws:

InvalidParameterTypeException - if the value is not an integer type.

See Also:

setValue(int), intValueList()

booleanValue

@UML(identifier="booleanValue",
     obligation=CONDITIONAL,
     specification=ISO_19111)
boolean booleanValue()
                                                                                                         throws InvalidParameterTypeException

Returns the boolean value of an operation parameter A boolean value does not have an associated unit of measure.

Returns:

The boolean value represented by this parameter.

Throws:

InvalidParameterTypeException - if the value is not a boolean type.

See Also:

setValue(boolean)

stringValue

@UML(identifier="stringValue",
     obligation=CONDITIONAL,
     specification=ISO_19111)
java.lang.String stringValue()
                                                                                                                throws InvalidParameterTypeException

Returns the string value of an operation parameter. A string value does not have an associated unit of measure.

Returns:

The string value represented by this parameter.

Throws:

InvalidParameterTypeException - if the value is not a string.

See Also:

getValue(), setValue(Object)

doubleValueList

double[] doubleValueList(Unit unit)
                  throws InvalidParameterTypeException

Returns an ordered sequence of numeric values in the specified unit of measure. This convenience method apply unit conversion on the fly as needed.

Parameters:

unit - The unit of measure for the value to be returned.

Returns:

The sequence of values represented by this parameter after conversion to type double and conversion to unit.

Throws:

InvalidParameterTypeException - if the value is not an array of doubles.

java.lang.IllegalArgumentException - if the specified unit is invalid for this parameter.

See Also:

getUnit(), setValue(double[],Unit), doubleValue(Unit)

doubleValueList

@UML(identifier="valueList",
     obligation=CONDITIONAL,
     specification=ISO_19111)
double[] doubleValueList()
                                                                                                          throws InvalidParameterTypeException

Returns an ordered sequence of two or more numeric values of an operation parameter list, where each value has the same associated unit of measure.

Returns:

The sequence of values represented by this parameter.

Throws:

InvalidParameterTypeException - if the value is not an array of doubles.

See Also:

getUnit(), setValue(Object), doubleValue()

intValueList

@UML(identifier="integerValueList",
     obligation=CONDITIONAL,
     specification=ISO_19111)
int[] intValueList()
                                                                                                           throws InvalidParameterTypeException

Returns an ordered sequence of two or more integer values of an operation parameter list, usually used for counts. These integer values do not have an associated unit of measure.

Returns:

The sequence of values represented by this parameter.

Throws:

InvalidParameterTypeException - if the value is not an array of ints.

See Also:

setValue(Object), intValue()

valueFile

@UML(identifier="valueFile",
     obligation=CONDITIONAL,
     specification=ISO_19111)
java.net.URI valueFile()
                                                                                                        throws InvalidParameterTypeException

Returns a reference to a file or a part of a file containing one or more parameter values. When referencing a part of a file, that file must contain multiple identified parts, such as an XML encoded document. Furthermore, the referenced file or part of a file can reference another part of the same or different files, as allowed in XML documents.

Returns:

The reference to a file containing parameter values.

Throws:

InvalidParameterTypeException - if the value is not a reference to a file or an URI.

See Also:

getValue(), setValue(Object)

getValue

@UML(identifier="value",
     obligation=CONDITIONAL,
     specification=ISO_19111)
java.lang.Object getValue()

Returns the parameter value as an object. The object type is typically a Double, Integer, Boolean, String, URI, double[] or int[].

Returns:

The parameter value as an object.

See Also:

setValue(Object)

setValue

void setValue(double[] values,
              Unit unit)
       throws InvalidParameterValueException

Set the parameter value as an array of floating point and their associated unit.

Parameters:

values - The parameter values.

unit - The unit for the specified value.

Throws:

InvalidParameterValueException - if the floating point type is inappropriate for this parameter, or if the value is illegal for some other reason (for example a value out of range).

setValue

void setValue(double value,
              Unit unit)
       throws InvalidParameterValueException

Set the parameter value as a floating point and its associated unit.

Parameters:

value - The parameter value.

unit - The unit for the specified value.

Throws:

InvalidParameterValueException - if the floating point type is inappropriate for this parameter, or if the value is illegal for some other reason (for example a value out of range).

See Also:

setValue(double), doubleValue(Unit)

setValue

void setValue(double value)
       throws InvalidParameterValueException

Set the parameter value as a floating point.

Parameters:

value - The parameter value.

Throws:

InvalidParameterValueException - if the floating point type is inappropriate for this parameter, or if the value is illegal for some other reason (for example a value out of range).

See Also:

setValue(double,Unit), doubleValue()

setValue

void setValue(int value)
       throws InvalidParameterValueException

Set the parameter value as an integer.

Parameters:

value - The parameter value.

Throws:

InvalidParameterValueException - if the integer type is inappropriate for this parameter, or if the value is illegal for some other reason (for example a value out of range).

See Also:

intValue()

setValue

void setValue(boolean value)
       throws InvalidParameterValueException

Set the parameter value as a boolean.

Parameters:

value - The parameter value.

Throws:

InvalidParameterValueException - if the boolean type is inappropriate for this parameter.

See Also:

booleanValue()

setValue

void setValue(java.lang.Object value)
       throws InvalidParameterValueException

Set the parameter value as an object. The object type is typically a Double, Integer, Boolean, String, URI, double[] or int[].

Parameters:

value - The parameter value.

Throws:

InvalidParameterValueException - if the type of value is inappropriate for this parameter, or if the value is illegal for some other reason (for example the value is numeric and out of range).

See Also:

getValue()

clone

java.lang.Object clone()

Returns a copy of this parameter value.

Specified by:

clone in interface GeneralParameterValue

Returns:

A copy of this parameter value.

See Also:

Object.clone()