cern.colt.map.tfloat

Class OpenLongFloatHashMap

java.lang.Object

cern.colt.PersistentObject

cern.colt.map.AbstractMap

cern.colt.map.tfloat.AbstractLongFloatMap

cern.colt.map.tfloat.OpenLongFloatHashMap

All Implemented Interfaces:

java.io.Serializable, java.lang.Cloneable

public class OpenLongFloatHashMap
extends AbstractLongFloatMap

Hash map holding (key,value) associations of type (int-->float); Automatically grows and shrinks as needed; Implemented using open addressing with float hashing. First see the package summary and javadoc tree view to get the broad picture. Overrides many methods for performance reasons only.

See Also:

HashMap, Serialized Form

Constructor Summary

Constructors

Constructor and Description
OpenLongFloatHashMap() Constructs an empty map with default capacity and default load factors.
OpenLongFloatHashMap(int initialCapacity) Constructs an empty map with the specified initial capacity and default load factors.
OpenLongFloatHashMap(int initialCapacity, double minLoadFactor, double maxLoadFactor) Constructs an empty map with the specified initial capacity and the specified minimum and maximum load factor.

Method Summary

Modifier and Type	Method and Description
void	assign(AbstractLongFloatMap other) Clears the receiver, then adds all (key,value) pairs of other values to it.
void	assign(FloatFunction function) Assigns the result of a function to each value; v[i] = function(v[i]).
void	clear() Removes all (key,value) associations from the receiver.
java.lang.Object	clone() Returns a deep copy of the receiver.
boolean	containsKey(long key) Returns true if the receiver contains the specified key.
boolean	containsValue(float value) Returns true if the receiver contains the specified value.
void	ensureCapacity(int minCapacity) Ensures that the receiver can hold at least the specified number of associations without needing to allocate new internal memory.
boolean	forEachKey(LongProcedure procedure) Applies a procedure to each key of the receiver, if any.
boolean	forEachPair(LongFloatProcedure procedure) Applies a procedure to each (key,value) pair of the receiver, if any.
float	get(long key) Returns the value associated with the specified key.
long	keyOf(float value) Returns the first key the given value is associated with.
void	keys(LongArrayList list) Fills all keys contained in the receiver into the specified list.
void	pairsMatching(LongFloatProcedure condition, LongArrayList keyList, FloatArrayList valueList) Fills all pairs satisfying a given condition into the specified lists.
boolean	put(long key, float value) Associates the given key with the given value.
boolean	removeKey(long key) Removes the given key with its associated element from the receiver, if present.
void	trimToSize() Trims the capacity of the receiver to be the receiver's current size.
void	values(FloatArrayList list) Fills all values contained in the receiver into the specified list.

Methods inherited from class cern.colt.map.tfloat.AbstractLongFloatMap

copy, equals, keys, keysSortedByValue, pairsSortedByKey, pairsSortedByValue, toString, toStringByValue, values

Methods inherited from class cern.colt.map.AbstractMap

isEmpty, size

Methods inherited from class java.lang.Object

getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail

OpenLongFloatHashMap

public OpenLongFloatHashMap()

Constructs an empty map with default capacity and default load factors.

OpenLongFloatHashMap

public OpenLongFloatHashMap(int initialCapacity)

Constructs an empty map with the specified initial capacity and default load factors.

Parameters:

initialCapacity - the initial capacity of the map.

Throws:

java.lang.IllegalArgumentException - if the initial capacity is less than zero.

OpenLongFloatHashMap

public OpenLongFloatHashMap(int initialCapacity,
                            double minLoadFactor,
                            double maxLoadFactor)

Constructs an empty map with the specified initial capacity and the specified minimum and maximum load factor.

Parameters:

initialCapacity - the initial capacity.

minLoadFactor - the minimum load factor.

maxLoadFactor - the maximum load factor.

Throws:

java.lang.IllegalArgumentException - if initialCapacity < 0 || (minLoadFactor < 0.0 || minLoadFactor >= 1.0) || (maxLoadFactor <= 0.0 || maxLoadFactor >= 1.0) || (minLoadFactor >= maxLoadFactor) .

Method Detail

assign

public void assign(FloatFunction function)

Assigns the result of a function to each value; v[i] = function(v[i]).

Overrides:

assign in class AbstractLongFloatMap

Parameters:

function - a function object taking as argument the current association's value.

assign

public void assign(AbstractLongFloatMap other)

Clears the receiver, then adds all (key,value) pairs of other values to it.

Overrides:

assign in class AbstractLongFloatMap

Parameters:

other - the other map to be copied into the receiver.

clear

public void clear()

Removes all (key,value) associations from the receiver. Implicitly calls trimToSize().

Specified by:

clear in class AbstractMap

clone

public java.lang.Object clone()

Returns a deep copy of the receiver.

Overrides:

clone in class PersistentObject

Returns:

a deep copy of the receiver.

containsKey

public boolean containsKey(long key)

Returns true if the receiver contains the specified key.

Overrides:

containsKey in class AbstractLongFloatMap

Returns:

true if the receiver contains the specified key.

containsValue

public boolean containsValue(float value)

Returns true if the receiver contains the specified value.

Overrides:

containsValue in class AbstractLongFloatMap

Returns:

true if the receiver contains the specified value.

ensureCapacity

public void ensureCapacity(int minCapacity)

Ensures that the receiver can hold at least the specified number of associations without needing to allocate new internal memory. If necessary, allocates new internal memory and increases the capacity of the receiver.

This method never need be called; it is for performance tuning only. Calling this method before put()ing a large number of associations boosts performance, because the receiver will grow only once instead of potentially many times and hash collisions get less probable.

Overrides:

ensureCapacity in class AbstractMap

Parameters:

minCapacity - the desired minimum capacity.

forEachKey

public boolean forEachKey(LongProcedure procedure)

Applies a procedure to each key of the receiver, if any. Note: Iterates over the keys in no particular order. Subclasses can define a particular order, for example, "sorted by key". All methods which can be expressed in terms of this method (most methods can) must guarantee to use the same order defined by this method, even if it is no particular order. This is necessary so that, for example, methods keys and values will yield association pairs, not two uncorrelated lists.

Specified by:

forEachKey in class AbstractLongFloatMap

Parameters:

procedure - the procedure to be applied. Stops iteration if the procedure returns false, otherwise continues.

Returns:

false if the procedure stopped before all keys where iterated over, true otherwise.

forEachPair

public boolean forEachPair(LongFloatProcedure procedure)

Applies a procedure to each (key,value) pair of the receiver, if any. Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

Overrides:

forEachPair in class AbstractLongFloatMap

Parameters:

procedure - the procedure to be applied. Stops iteration if the procedure returns false, otherwise continues.

Returns:

false if the procedure stopped before all keys where iterated over, true otherwise.

get

public float get(long key)

Returns the value associated with the specified key. It is often a good idea to first check with containsKey(long) whether the given key has a value associated or not, i.e. whether there exists an association for the given key or not.

Specified by:

get in class AbstractLongFloatMap

Parameters:

key - the key to be searched for.

Returns:

the value associated with the specified key; 0 if no such key is present.

keyOf

public long keyOf(float value)

Returns the first key the given value is associated with. It is often a good idea to first check with containsValue(float) whether there exists an association from a key to this value. Search order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

Overrides:

keyOf in class AbstractLongFloatMap

Parameters:

value - the value to search for.

Returns:

the first key for which holds get(key) == value; returns Long.MIN_VALUE if no such key exists.

keys

public void keys(LongArrayList list)

Fills all keys contained in the receiver into the specified list. Fills the list, starting at index 0. After this call returns the specified list has a new size that equals this.size(). Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

This method can be used to iterate over the keys of the receiver.

Overrides:

keys in class AbstractLongFloatMap

Parameters:

list - the list to be filled, can have any size.

pairsMatching

public void pairsMatching(LongFloatProcedure condition,
                          LongArrayList keyList,
                          FloatArrayList valueList)

Fills all pairs satisfying a given condition into the specified lists. Fills into the lists, starting at index 0. After this call returns the specified lists both have a new size, the number of pairs satisfying the condition. Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

Example:

   LongFloatProcedure condition = new LongFloatProcedure() { // match even keys only
   public boolean apply(long key, float value) { return key%2==0; }
   }
   keys = (8,7,6), values = (1,2,2) --> keyList = (6,8), valueList = (2,1)
 </tt>
 

Overrides:

pairsMatching in class AbstractLongFloatMap

Parameters:

condition - the condition to be matched. Takes the current key as first and the current value as second argument.

keyList - the list to be filled with keys, can have any size.

valueList - the list to be filled with values, can have any size.

put

public boolean put(long key,
                   float value)

Associates the given key with the given value. Replaces any old (key,someOtherValue) association, if existing.

Specified by:

put in class AbstractLongFloatMap

Parameters:

key - the key the value shall be associated with.

value - the value to be associated.

Returns:

true if the receiver did not already contain such a key; false if the receiver did already contain such a key - the new value has now replaced the formerly associated value.

removeKey

public boolean removeKey(long key)

Removes the given key with its associated element from the receiver, if present.

Specified by:

removeKey in class AbstractLongFloatMap

Parameters:

key - the key to be removed from the receiver.

Returns:

true if the receiver contained the specified key, false otherwise.

trimToSize

public void trimToSize()

Trims the capacity of the receiver to be the receiver's current size. Releases any superfluous internal memory. An application can use this operation to minimize the storage of the receiver.

Overrides:

trimToSize in class AbstractMap

values

public void values(FloatArrayList list)

Fills all values contained in the receiver into the specified list. Fills the list, starting at index 0. After this call returns the specified list has a new size that equals this.size(). Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

This method can be used to iterate over the values of the receiver.

Overrides:

values in class AbstractLongFloatMap

Parameters:

list - the list to be filled, can have any size.